Power Whip (3-phase, 208V or 277V)

The Power Whip is an installation component used to connect the eGauge meter to a breaker panel.

Each Power Whip includes a 5-pin Power Plug and four 8’ lengths of THHN #12 stranded copper wire for Neutral, L1, L2 and L3. Available in 208V (white, black, red blue) and 277V (white, yellow, orange, brown).



Hardware included:

1x 5-pin power plug (attached to wires via epoxy)

4x 8' segments of THHN #12 wire (NEC color coded for US voltage)





Assembly/installation information

The 5-pin power plug is connected to the 4 segments of wire via epoxy. Trim the wire segments to length and connect the appropriate colors to the correct breaker and neutral connections. Insert the 5-pin power plug to eGauge when complete.


If the 208V whip is used on a single-phase 208V or 240V system, the blue wire (L3) should be removed from the whip assembly.


Technical information and documentation

  • THHN #12 stranded copper wire

  • 208V Coloring scheme:
    208V ColorConnection
    WhiteNeutral
    BlackL1
    RedL2
    BlueL3


  • 277V Coloring scheme:
    277V ColorConnection
    WhiteNeutral
    YellowL1
    OrangeL2
    BrownL3


  • 240V or 208V single-phase coloring scheme:
    Single-phase ColorConnection
    WhiteNeutral
    BlackL1
    RedL2
    Blue[REMOVED]

Related Information

eGauge 5-pin power plug