General

What do the different colors on the Status LED mean?
eGauge2 and EG30xx hardware features a front-mounted status LED which can convey useful information regarding device connectivity. EG4xxx hardware features ...
Fri, Jan 12, 2018 at 2:16 PM
What do the different LEDs on the HomePlug adapter mean?
TRENDnet HomePlug AV (TPL-406E2K) LED Function Typical Behavior Other Behavior POWERIndicates the adapter has power Green light No LED - no communicat...
Thu, May 3, 2018 at 2:45 PM
Where can I find my device name?
Each eGauge meter has a unique device name (also referred to as hostname) that identifies the meter to the egauge.net proxy server. You will need this name ...
Thu, Mar 8, 2018 at 5:37 PM
Help, I lost my device password!
First, make sure you are accessing the eGauge correctly. By default, the factory credentials on the eGauge can only be used from a computer connected to the...
Mon, Jun 5, 2017 at 1:08 PM
Where do I find the MAC address for my device?
The eGauge has one or two MAC addresses, depending on model. The first address is for Ethernet network communication (through the router or local area netwo...
Tue, Jan 2, 2018 at 8:04 AM
How do I power cycle the eGauge?
In most installations, the eGauge (not to be confused with the HomePlug adapter) is powered directly from a circuit breaker or breakers. In your breaker-pan...
Wed, Oct 18, 2017 at 10:31 AM
How do I perform a backup and restore of the eGauge data?
The eGauge has the ability to back up data recorded on the device, and restore it to any eGauge device with the same register configuration. This includes e...
Wed, Oct 18, 2017 at 10:30 AM
Why do I see negative generation overnight?
Inverters require power to function, even in standby mode. When there is no production (for example, during the night or when panels are covered with snow) ...
Wed, May 24, 2017 at 1:49 PM
What is proof of ownership, and why do I need to provide it?
eGauge meters may be registered to a specific individual or company, or they may be unregistered. In either case, when a request is made for a password rese...
Fri, Mar 9, 2018 at 8:46 AM
Where can I find a HomePlug 1.0 adapter for my eGauge2?
The eGauge2 requires a HomePlug (PLC) adapter that uses the HomePlug 1.0 standard. Adapters that use the HomePlug AV standard (such as the TP-Link TL-PA2010...
Tue, Jul 18, 2017 at 8:36 AM