Third-party hardware

Maestro E206XT cell router configuration
The Maestro E206XT is a powerful and highly configurable cellular modem and router. This article details configuring the Maestro E206XT to provide Internet ...
Mon, Jun 5, 2017 at 11:13 AM
MultiTech cell modem troubleshooting (legacy)
The MultiTech cell modem is used with some eGauge installations to provide cellular Internet access in locations where wired Internet is not a viable option...
Thu, Apr 12, 2018 at 2:42 PM
TP-Link access point setup (TL-WA701ND) [discontinued]
NOTICE: The TP-Link TL-WA701ND has been discontinued and replaced with the TP-Link TL-WA801ND. If using the TL-WA801ND, please visit the Knowledgebase artic...
Tue, May 1, 2018 at 3:57 PM
Multitech Cell Modem Configuration
eGauge offers limited support for the Multitech cellular modem. This hardware is typically used in locations where local Internet access is not available or...
Thu, Oct 19, 2017 at 12:45 PM
IMT Si-RS485TC-2T-v-MB irradiance sensor wiring diagrams
The IMT Si-RS485TC-2T-v-MB irradiance sensor requires a serial converter in order to function with the eGauge. eGauge officially supports the Chiyu BF430  (...
Fri, Oct 20, 2017 at 11:30 AM
ACI TSense Environmental Sensor
The TSense Environmental Sensor from ACI can be used to read CO2 concentrations, relative humidity, and temperature. The TSense uses an RS485 interface, and...
Wed, Feb 28, 2018 at 12:34 PM
TP-Link access point setup (TL-WA801ND)
The TP-Link TL-WA801ND is a multi-function access point. This document is intended to assist with configuring the TL-WA801ND to allow the EG3000 to communic...
Tue, May 1, 2018 at 4:04 PM
TP-Link TL-WR802N USB-Powered WiFi bridge setup
The TP-Link TL-WR802N is a WiFi bridge that can be used to connect the eGauge to a wireless network. The bridge is powered by USB, so it may be powered dire...
Wed, Oct 17, 2018 at 4:08 PM