Contains documentation and examples covering various aspects of eGauge configuration.

Configuring an eGauge with a static IP address
By default, the eGauge meter uses DHCP to obtain an IP address from the local network. However, in some instances this may not be allowed. In these cases th...
Mon, Jun 5, 2017 at 2:59 PM
Pairing the eGauge with a HomePlug adapter
By default all HomePlug-compliant PLC devices use the same encryption key - this means that, out of the box, any HomePlug-compliant device should be able to...
Mon, Jun 5, 2017 at 3:01 PM
Configuring eGauge alerts
The eGauge can be configured to send alerts based on a variety of trigger conditions. Alerts must be configured through the eGauge interface, and the eGauge...
Mon, Jun 5, 2017 at 3:03 PM
eGauge configuration guide
The eGauge is a powerful, highly accurate piece of monitoring hardware. However, it is essential to configure the eGauge properly, or the readings obtained ...
Wed, Sep 27, 2017 at 2:01 PM
Connecting directly to the eGauge
The eGauge is most commonly accessed through the proxy server, using an address in the form or The eGau...
Mon, Jun 5, 2017 at 3:07 PM
Connecting via the eGauge proxy server using IE 10/11
Users with Internet Explorer 10 and 11 may require some additional steps to function properly with the eGauge proxy server. These steps are covered in the d...
Mon, Jun 5, 2017 at 3:09 PM
Checking and upgrading firmware
eGauge releases periodic firmware updates to address bugs, add functionality, and address security issues. Depending on the nature of the issue, a firmware ...
Mon, Jun 5, 2017 at 3:10 PM
eGauge Security Considerations
Please see the Networking and Security folder here
Tue, May 21, 2019 at 11:05 AM
Monitoring 480V delta systems
The eGauge can monitor 480V delta systems, provided it is installed with the proper stepdown transformers. Never attempt to connect the eGauge directly to a...
Fri, Jun 30, 2017 at 8:11 AM
Potential Transformer Configuration
The eGauge AC voltage inputs can handle up to 277Vrms between any line input (L1, L2, L3) and neutral terminal. If voltages exceed this range, potential tra...
Mon, Aug 7, 2017 at 1:34 PM