General eGauge Hardware

General information which applies to multiple models of eGauge (eGauge2, EG30xx, and EG4xxx). May also include information related to products that involve an eGauge (such as the PEK).

Protecting the eGauge with inline fuses
As long as it is permitted by code, an inline fuse can be used to protect the eGauge. We suggest using a quick disconnect fuse block to allow the eGauge to b...
Tue, May 23, 2017 at 9:35 AM
eGauge hardware exchange program
If warranty coverage is not available, an older or damaged eGauge may be exchanged for a $100 credit towards a replacement eGauge Pro or eGauge Core. Credit...
Thu, Dec 21, 2017 at 1:29 PM
Panel phasing and eGauge installation
Correct phasing (associating a CT with the correct voltage reference) is a critical component of the eGauge installation. Ideally, phasing should be verifie...
Mon, Jun 5, 2017 at 11:40 AM
Powered enclosure kit (PEK) datasheet
The Powered Enclosure Kit (PEK) is a series of tested components that simplify the installation of an eGauge (and in some cases additional communications ha...
Wed, Oct 18, 2017 at 10:11 AM
Split-Phase installation tutorial
There are a number of considerations when installing an eGauge, including positioning of CTs, mounting the eGauge, and routing wiring appropriately. The vid...
Fri, Mar 9, 2018 at 8:57 AM
Three-Phase installation tutorial
There are a number of considerations when installing an eGauge, including positioning of CTs, mounting the eGauge, and routing wiring appropriately. The vid...
Fri, Mar 9, 2018 at 8:57 AM
Powered enclosure kit (PEK) assembly tutorial
The powered enclosure kit (PEK) provides a collection of tested, supported hardware to make installing and mounting eGauge hardware. Additional provisions e...
Thu, Mar 29, 2018 at 1:21 PM
Installation overview
The installation overview tutorial video contains some useful information pertaining to general eGauge installation. Depending on the type of installation, ...
Mon, Jun 5, 2017 at 11:42 AM
Surges and overvoltage
The eGauge is rated for overvoltage CAT III, covering installation on main distribution panels. Devices that experience a CAT III or lower surge may have in...
Fri, Apr 13, 2018 at 2:33 PM