Product Pages

Product: 12 Volt Power Supply
12 Volt Power Supply The 12 Volt Power supply is a standard power supply to convert 100-240VAC @ 0.5A (50/60Hz) to +12VDC @ 1A used to power the BF430 RS48...
Wed, Aug 7, 2019 at 11:15 AM
Product: eGauge Sensor Hub ESH044
eGauge Sensor Hub ESH044 The eGauge Sensor Hub (ESH044) allows up to four CTs or other approved (powered or unpowered) sensors to be connected to a sing...
Wed, Aug 7, 2019 at 11:17 AM
Product: Accuracy Certificate
Accuracy Certificate A printed accuracy certificate may be purchased with an eGauge meter to show the test conditions and results of the specific eGauge me...
Wed, Aug 7, 2019 at 11:15 AM
Product: RS485-USB Converter
RS485-USB Converter eGauge Model: USB485 The eGauge USB485 is used to receive and send serial data between a RS485 serial chain and a host's USB p...
Fri, Aug 16, 2019 at 2:29 PM
Product: eGauge Display Caster
eGauge Display Caster eGauge Model: EDC The eGauge Display Caster provides an easy method display an eGauge device interface on a TV or monitor via HDM...
Wed, Aug 7, 2019 at 11:15 AM
Product: Hinged Enclosure
Hinged Enclosure Current manufacturer information: H------HLL (dashes replaced with dimensions, see spec sheets below) Integra polycarbonate enclosure,...
Wed, Aug 7, 2019 at 11:15 AM
Product: Powered Enclosure Kit (120/240VAC, 120/208VAC)
Powered Enclosure Kit (120/240VAC, 120/208VAC) The Powered Enclosure Kit is designed for installation of the eGauge in combination with one of several comm...
Wed, Aug 7, 2019 at 11:16 AM
Product: Powered Enclosure Kit (277/480VAC)
Powered Enclosure Kit (277/480VAC) The Powered Enclosure Kit is designed for installation of the eGauge in combination with one of several communication pr...
Wed, Aug 7, 2019 at 11:16 AM
Product: Twisted Pair Wire
Product: Twisted Pair Wire (by foot) Twisted Pair Wire eGauge Model: TPFOOT Twisted pair wire is available for extending CT leads. Twisted pair wi...
Fri, Aug 16, 2019 at 3:48 PM
Product: Power Whip (208V or 277V)
Power Whip (3-phase, 208V or 277V) The Power Whip is an installation component used to connect the eGauge meter to a breaker panel. Each Power Whip includ...
Wed, Aug 7, 2019 at 11:16 AM