eGauge Meter Software

Configuring a remote eGauge
Best practice is to set up all the registers on all devices before attempting to pull registers from the secondary eGauge(s) to the main eGauge. Adding and ...
Fri, Mar 9, 2018 at 9:04 AM
eGauge language options and adding new languages
The EG30xx and EG4xxx have support for different locales. The eGauge will use the language associated with the locale that is requested by the user's b...
Wed, Oct 4, 2017 at 1:29 PM
eGauge date formats
There are two common date formats currently in use: dd/mm/yyyy and mm/dd/yyyy. The date format shown in the eGauge interface will default to one of these tw...
Mon, Jun 5, 2017 at 2:20 PM
Interpreting XML data and examples
Contained in this article: General Information Example: Energy and power for specific dates External Links: Unofficial repository with example API co...
Tue, Oct 15, 2019 at 2:14 PM
XML API
eGauge Systems offers access to a free, unrestricted API for use in developing applications which fetch data from the eGauge meter. This API covers the same...
Mon, Jun 5, 2017 at 3:17 PM
BACnet PICS
The BACnet Protocol Implementation Conformance Statement (PICS) for the eGauge is available below. BACNET PICS
Mon, Jun 5, 2017 at 3:12 PM
BACnet register map
The eGauge does not have a fixed BACnet register map. Instead, registers are mapped as they are created. Thus, the map for two different eGauges will differ...
Wed, Feb 28, 2018 at 12:22 PM
High-gain mode
High-gain mode is available on the EG4xxx hardware only. To enable high-gain mode, navigate to Settings -> Installation. Check the "Use high-gain mo...
Wed, Aug 14, 2019 at 4:42 PM
Configuring WiFi
The EG4xxx, with an attached supported USB WiFi dongle, can be configured to connect to a WiFi network. There are two methods of connecting the eGauge to a ...
Mon, Aug 7, 2017 at 12:39 PM
Modbus Output communication
All eGauge models with firmware v3.2 or higher have Modbus TCP output capability. eGauge models with USB ports also have capability for Modbus RTU (serial v...
Tue, Oct 29, 2019 at 2:50 PM